====== Filesystem Basics ======
===== Hierarchical File Systems =====
Most modern computers are equipped with one or more random-access storage devices -- either a mechanical hard disk drive (HDD), or a fully electronic solid state disk (SSD). Both of these provide a numbered set of blocks or sectors, each of which stores a set amount of data (typically 512 or 1024 bytes).
In order to conveniently use this storage, it is arranged into //files//, which are named collections of bytes of arbitrary length. The organization of blocks/sectors into files is handled by a //filesystem//, which is a scheme for structuring data, along with the corresponding software to implement this scheme. Most filesystems track certain metadata about a file in addition to the file name (or "filename"), such as the date/time of creation, the date/time of last modification, the owner or original creator of the file, and the permissions applicable to the file (for example, who is permitted to read and to change the file contents).
A hierarchical filesystem introduces the concept of //directories//, which are special files which hold zero or more other files. The files in a directory may themselves be directories, enabling files to be nested into an arbitrary hierarchy. The master directory is called the //root// directory.
When graphical user interfaces were developed, the metaphor of a traditional paper-based office was introduced, and directories were called //folders// in this metaphor (a folder in a traditional office is a piece of card stock folded in half to group together related papers). Therefore, the terms //directory// and //folder// are synonyms.
===== Filenames =====
The rules for valid filenames vary with the type of filesystem, but generally, filenames may include letters, numbers, dashes, underscores, and periods. Other punctuation marks may be acceptable in some filesystems but not in others, and are therefore best avoided, especially if files may be transferred between different types of filesystems or between computers.
Spaces may be included in filenames, but may require quoting if accessed from the command-line, so that the shell does not interpret the filename as two or more separate filenames. For example, the filename "red leaf" may be interpreted as two separate filenames if written without quoting:
ls red leaf
When quotes are added, the ambiguity is removed, and the shell will correctly interpret the filename as a single name:
ls "red leaf"
For this reason, it is good practice to avoid using spaces in filenames (underscores are a good alternative).
==== Extensions ====
Many operating systems use an //extension// at the end of a filename to denote the type of data stored in the file. These extensions are delimited by a period followed by one or more characters. For example, in the filename:
ops102_project.pdf
The extension is "pdf", denoting a file in Portable Document Format.
It is unusual to use multiple extensions on a Windows system, but not uncommon on a Linux (or other Unix-like) system.
For example, on a Linux system, the filename
backup.tar.gz
has two extensions, "tar" indicating a archive created with the ''tar'' command, and "gz" indiciating that the file was compressed with the ''gzip'' command.
==== Case Sensitivity ====
Some filesystems are case-sensitive, and UPPER- and lower-case letters are considered to be different. For example, the filenames ''MILK.PDF'', ''Milk.pdf'', and ''milk.pdf'' refer to three different files. This is the case with most Linux (and Unix-like) filesystems.
Most Windows filesystems are not case-sensitive, so the filesnames ''MILK.PDF'', ''Milk.pdf'', and ''milk.pdf'' would refer to the same file.
===== Current Directory or Working Directory or Current Working Directory =====
Most operating systems have the concept of a "current directory" or "working directory", which allows a directory to be temporarily designated as the current working location. The working directory may be changed at any time.
To change the current working directory on Linux or on Windows, use the cd command followed by a directory name:
cd ops102
To see the name of the current directory, use the command ''pwd'' (Print Working Directory) on Linux or ''cd'' on Windows.
To change your current directory to your home directory on Linux, use the ''cd'' command by itself (with no arguments).
===== Pathnames =====
A //pathname// is a filename that includes information about the directory in which the file is stored. (Sometime pathnames are simply called filenames!).
There are three types of pathnames, each of which has advantages and disadvantages. It is often necessary to use multiple types of pathnames in one command -- for example, when copying information from one directory to another directory.
These are the three types of pathnames:
==== Absolute Pathname ====
An absolute pathname starts with a slash (on Unix-based operating systems, such as Linux), or a backslash (on Windows), indicating the root directory. It contains the names of all of the directories from the root directory to the specified file, separated by slash/backslash characters.
For example, on a Linux system, the pathname
/home/kim/ops102/presentation.pdf
indicates that the file presentation.pdf can be found by starting at the root directory, then traversing to a directory named "home" containing the directory "kim" containing the directory "ops102" containing the file ("presentation.pdf").
Similarly, the Windows pathname
\Users\kim\ops102\presentation.pdf
indicates that the file presentation.pdf can be found by starting at the root directory, then traversing to a directory named "Users" containin the directory "kim" containing the directory "ops102" containing the file ("presentation.pdf").
Absolute pathnames can be readily identified by the fact that they start with the slash/backslash character. They are often the longest form of the pathname, but they are unambiguous.
==== Relative-to-Home Pathnames ====
On Linux (and other Unix-like operating systems), pathnames may be specified starting with the tilde ("~") character followed by a slash, which represents the current user's home directory. This is a directory assigned by the system administrator which contains all of the user's personal files. The home directory is usually (but not always) ''/home///username//''.
For example, if the current user's home directory is ''/home/kim'', then the filename
~/ops102/presentation.pdf
corresponds to the absolute pathname
/home/kim/ops102/presentation.pdf
For any file in the user's home directory, a relative-to-home pathname is generally shorter than an absolute pathanme. However, a relative-to-home pathname will have a different meaning for other users, since each user has a unique home directory.
You can also specify the user whose home directory is to be used as the starting point, by placing the a userid between the tilde and slash characters. Thus the pathanme
~kim/ops102/presentation.pdf
is relative to the home directory of the user "kim", regardless of which user is currently logged in, while the pathname
~sam/ops102/presentation.pdf
is relative to the home directory of the user "sam".
==== Relative Pathnames ====
Any pathname that does not start with a slash/backslash or a tilde character is a //relative// pathname, which is interpreted as starting at the current directory.
If the current directory is ''/home/kim/ops102'', then the Linux pathname
presentation.pdf
is interpreted as
/home/kim/ops102/presentation.pdf
The symbol ".." means the parent directory. Assuming the same current directory as above (''/home/kim/ops102''), the Linux pathname
../Downloads/example.txt
Is interpreted as
/home/kim/Downloads/example.txt
In the same way, the symbol "." is interpreted as referring to the current directory, so
./test.odt
is the same as
test.odt
and both refer to
/home/kim/ops102/test.odt
Likewise, if the current directory on a Windows system was ''\Users\kim'', then the pathaname
ops102\presentation.pdf
refers to the absolute pathname
\Users\kim\ops102\presentation.pdf
And the relative pathname
..\jdoe\Downloads\example.txt
refers to the absolute pathname
\Users\jdoe\Downloads\example.txt
Relative pathnames are often the shortest form of pathname //if// the target file is in the current working directory or a subdirectory of the current working directory, but the meaning of a relative pathname changes based on the current working directory.
===== Directory vs File Names =====
It is often impossible to tell whether a pathname refers to a file or to a directory. For example, the Linux pathname ''/home/chris/presentation'' might refer to a file named ''presentation'' or to a directory named ''presentation''.
If you wish to explicitly indicate that a pathname refers to a directory, append a slash or backslash to the pathname.
===== Volume Designators =====
On Windows systems, a volume designator consisting of a letter followed by a colon may prefix a pathname. The volume may be a partition on a disk drive (HDD or SSD), a shortcut to a network storage location, or a multi-drive volume, where multiple partitions or disks are combined into a single storage pool.
Since the original IBM PC was designed to have up to two floppy disk drives, designated A: and B:, the main/first disk drive in a Windows system is usually designated as volume C:
Therefore, the \Windows folder on the main/first disk drive on a Windows system may be referred to as
C:\Windows
The volume designator is case-insensitive.
Each unique volume on a Windows system has its own current/working directory. You can switch between volumes by typing the volume designator by itself.
On a Linux system, instead of using drive designators, volumes are //mounted// into the filesystem hierarchy -- that is, volumes are attached as directories, creating a unified hierarchy with a single root directory.
===== Basic Commands for Dealing with Files and Directories =====
Here are some basic commands for creating and removing files and directories, changing and displaying the current directory, and displaying a tree diagram of a directory hierarchy. We will look at other commands and
^ Description ^ Linux Command ^ Windows Command ^ Notes ^
| Make a Directory | mkdir //directory// | mkdir //directory// | |
| Remove a Directory (Must be empty)| rmdir //directory// | rmdir //directory// | |
| Change (Working) Directory | cd //directory// | cd //directory// | |
| Print Current Working Directory | pwd | cd | |
| Change to Home Directory | cd | | |
| List Contents of Directory | ls \\ ls -l | dir | Linux: -l option displays long listing (including permissions, ownership, size, modification date/time) |
| Create an Empty File | touch //file// | copy nul //file// | |
| Remove/Delete a File | rm //file// | del //file// | |
| Display a Tree Diagram starting at Current Directory | tree | tree\\ tree /f | Windows: /f causes tree to display files (otherwise only directories are shown) |
| Copy a file | cp //sourcefile// //destinationfile// | copy //sourcefile// //destinationfile// | |
| Move or rename a file | mv //currentfilename// //newfilename// | move //currentfilename// //newfilename// | |
| Display the text contents of a file | cat //file// | type //file// | Note: Using these commands on a file that contains non-text data may look very strange. |